Description
For all you budding cue makers and repairers.
Premium splice of flame maple ready for immediate splicing.
Suitable for added decorative front splice to a new/old cue.
*Machined on BOTH sides – Ready to splice immediately!*
***Limited Stock***
I’ve done all the hard work you:
- Cut from larger stock to get the best grain/pattern
- Shaped to a perfect taper to minimise stock wastage and save you lots of time in final planing/shaping on the cue.
- Sanded perfectly flat on BOTH sides – Big benefit – Choose which way up to put it to bring out the best in the wood.
If you have bought wood, cut, planed and sanded to perfect splice size, you will know how much work and time goes into it.
Especially if you only have limited tools at your disposal…
You will also know how long it takes to plane down big over-sized pieces!
By giving you the splice in as near perfect size as possible and machined on both sides, I’m making your life a LOT easier :~)
- Length – Approximately 11-12″
- Thickness – Approximately 10mm down to 1mm
Good Luck!
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.